Rosenberger Cat6 23AWG UTP Cable 305M | CP11-141-12-OR

Overview of Rosenberger Cat6 23AWG UTP Cable 305M

The Rosenberger CP11-141-12-OR is a Cat6 23AWG UTP network cable supplied in a 305-meter bulk length with an orange cable jacket. It is designed for professional structured Ethernet cabling installations where permanent network cable runs are required between telecommunications rooms, network cabinets, patch panels, and network outlets.

The cable features 23 AWG conductors and Unshielded Twisted Pair (UTP) construction with four twisted pairs. It is suitable for structured Ethernet infrastructure and Gigabit Ethernet applications when installed as part of a complete compatible Cat6 cabling channel.

The 305-meter bulk length makes the cable suitable for larger network installation projects in offices, commercial buildings, educational institutions, server rooms, data centers, and enterprise network environments.

Key Features

• Cat6 Category: Designed for Category 6 structured Ethernet cabling applications.
• 23 AWG Conductor: Uses 23 AWG conductors suitable for professional permanent cabling installations.
• UTP Construction: Unshielded Twisted Pair design for standard Ethernet network infrastructure.
• 305-Meter Length: Supplied as bulk cable for professional structured-cabling projects.
• Four-Pair Configuration: Provides four twisted pairs for modern Ethernet connectivity.
• Gigabit Ethernet Applications: Suitable for Gigabit Ethernet when combined with compatible Cat6 components.
• Permanent Cabling: Suitable for horizontal and fixed structured-cabling runs.
• Patch Panel Compatibility: Suitable for termination at compatible Cat6 patch panels.
• Keystone Jack Compatibility: Suitable for compatible Cat6 RJ45 modular jacks and network outlets.
• Orange Jacket: Provides a professional appearance and can assist with cable identification within structured installations.
• Large-Scale Installation: 305M bulk length is suitable for multi-outlet network projects.
• Versatile Applications: Suitable for computers, IP cameras, VoIP phones, wireless access points, printers and other Ethernet devices.

Technical Specifications

Cat6 UTP Network Cable

The Rosenberger CP11-141-12-OR is a Category 6 UTP Ethernet cable designed for structured network infrastructure. Cat6 cabling is widely used in modern wired Ethernet installations where reliable high-speed network connectivity is required.

The cable is primarily intended for permanent network runs rather than flexible equipment connections. It can be installed between network outlets and centralized patch panels as part of a structured cabling system.

23 AWG Conductor

The cable uses 23 AWG conductors. American Wire Gauge describes conductor size, with a lower AWG number representing a larger conductor.

23 AWG is commonly used in professional structured Ethernet cabling and provides a suitable conductor size for permanent network infrastructure.

UTP Construction

UTP stands for Unshielded Twisted Pair. The cable does not use an overall metallic shield. Instead, the conductors are arranged into twisted pairs to help control electromagnetic interference and maintain the electrical characteristics required for Ethernet transmission.

UTP cabling is widely used in offices, commercial buildings, residential networks, enterprise LANs, IP surveillance systems, VoIP networks, and wireless access point infrastructure.

Four-Pair Ethernet Configuration

The CP11-141-12-OR uses a four-pair Ethernet configuration, providing the eight conductors required for standard four-pair structured Ethernet cabling.

Correct termination of all four pairs is important when deploying Ethernet applications that require four-pair transmission.

305-Meter Bulk Cable

The 305-meter bulk length is designed for professional structured-cabling projects. It allows installers to create multiple permanent cable runs from a single bulk cable supply.

This makes the cable suitable for installations where network outlets are distributed across offices, floors, buildings, classrooms, commercial premises, and other facilities.

Permanent Horizontal Cabling

The cable is suitable for permanent structured cabling between a telecommunications room or network cabinet and network outlets.

Permanent runs may be routed through suitable cable trays, conduits, ceilings, raised floors, walls, or other building infrastructure according to the project's requirements.

Patch Panel Termination

In a typical structured-cabling installation, one end of the permanent cable is terminated at a compatible Cat6 patch panel.

The patch panel provides a centralized termination point where cable runs can be labeled and connected to network switches using suitable patch cords.

Network Outlet Termination

The other end of the permanent cable can be terminated at a compatible Cat6 RJ45 keystone jack installed in a wall faceplate, floor outlet, or other network outlet.

This creates a fixed Ethernet connection point for computers, printers, IP phones, access points, cameras, and other network equipment.

Gigabit Ethernet Applications

Cat6 UTP cabling is widely used for Gigabit Ethernet network infrastructure. When installed with compatible Cat6 patch panels, modular jacks, patch cords, and active network equipment, the cable can form part of a Gigabit Ethernet structured cabling channel.

Actual network performance depends on the complete cabling channel and the capabilities of the connected network equipment.

Structured Cabling System

A structured cabling system typically includes permanent horizontal cable, patch panels, modular jacks, faceplates, patch cords, cable managers, switches, routers, and other network infrastructure.

The Rosenberger CP11-141-12-OR functions primarily as the permanent bulk-cable component within such an infrastructure.

Office Network Applications

The cable can be installed throughout offices to provide permanent Ethernet connections for workstations, printers, IP phones, conference rooms, meeting rooms, wireless access points, and other network devices.

Centralizing permanent cable terminations at a patch panel helps make office network connections easier to identify, document, troubleshoot, and maintain.

Enterprise Network Applications

Enterprise buildings can use 305-meter bulk Cat6 cable to create multiple permanent Ethernet links from telecommunications rooms to individual work areas.

The cable is suitable for structured LAN infrastructure where multiple network outlets need to be distributed throughout a building.

Server Room Applications

Server rooms and telecommunications rooms can use Cat6 UTP bulk cable as part of structured network infrastructure connecting network racks to distributed network outlets.

Appropriate patch panels, cable managers, and rack accessories should be used to maintain an organized installation.

Data Center Applications

Cat6 structured cabling can be used for compatible copper Ethernet connections in server rooms and data-center environments.

For data-center deployments, cable routing, airflow, cable density, bend radius, labeling, and network-performance requirements should be considered during installation.

IP Camera Applications

The CP11-141-12-OR can be used as permanent Ethernet cabling for compatible IP surveillance systems.

For PoE-powered IP cameras, the complete cabling channel should be compatible with the required PoE application, while the connected PoE switch or injector must provide the necessary power.

VoIP Applications

The cable can provide permanent structured Ethernet connectivity for compatible IP phones and VoIP systems.

Permanent cable runs can terminate at patch panels and network outlets, while flexible patch cords provide the final connection to switches and IP phones.

Wireless Access Point Applications

The cable is suitable for permanent Ethernet connections to wireless access points installed on ceilings, walls, or other locations.

Where an access point requires PoE, a compatible PoE switch or injector should be used to provide the required power over Ethernet.

Network Printer Applications

Cat6 structured cabling can provide wired Ethernet connections for compatible network printers and multifunction devices distributed throughout offices and commercial facilities.

Workstation Connectivity

The cable can be installed between a central network rack and workstation network outlets. Suitable patch cords can then connect desktop computers, docking stations, IP phones, and other Ethernet devices to the wall outlet.

Orange Cable Jacket

The orange jacket provides a highly visible cable color that can be useful for cable identification and organization within structured network installations.

Color coding can be incorporated into an organization's cable-management scheme to distinguish particular network systems, locations, or functions. However, cable colors should be combined with proper labeling for reliable identification.

Cable Management

During installation, the cable should be routed using suitable cable trays, conduits, raceways, or other approved infrastructure.

Proper cable management helps protect the cable from excessive mechanical stress and keeps the installation organized for future maintenance.

Termination Standards

The cable should be terminated using the applicable Ethernet wiring scheme, typically T568A or T568B.

The selected wiring scheme should be applied consistently throughout the relevant structured-cabling installation.

Cable Bend Radius

During installation, the cable should not be sharply bent, crushed, stretched, or subjected to excessive pulling force.

Maintaining the appropriate bend radius helps preserve the cable's electrical characteristics and transmission performance.

UTP vs Shielded Cable

UTP cable does not include an overall metallic shield. It is widely used in standard office, commercial, residential, and enterprise Ethernet installations.

Shielded cabling may be considered in environments with significant electromagnetic interference, depending on the project requirements. The appropriate cable construction should be selected based on the installation environment.

Network Performance Considerations

The Cat6 classification identifies the intended performance category of the cable, but complete Ethernet performance depends on all components in the channel.

For reliable Cat6 performance, use compatible Cat6 patch panels, keystone jacks, patch cords, connectors, and network equipment and follow appropriate installation practices.

Bulk Cable vs Patch Cord

Bulk network cable is intended for permanent structured-cabling runs and is generally terminated on site. Patch cords are typically factory terminated with RJ45 plugs and are designed for flexible connections between equipment and outlets.

The Rosenberger CP11-141-12-OR is a 305-meter bulk cable intended primarily for permanent structured-cabling installations.

Installation Planning

Before installation, plan cable routes, outlet locations, telecommunications rooms, network cabinets, and patch-panel positions.

Allow sufficient cable length for correct termination and service loops without creating excessive unused cable that could make cable management difficult.

Cable Labeling

Each permanent cable run should be labeled at both ends. A consistent labeling scheme makes it easier to identify which patch-panel port corresponds to each network outlet.

Clear labeling becomes increasingly important as the number of network connections increases.

Testing and Certification

After installation and termination, permanent Cat6 cable runs should be tested using appropriate network cable verification or certification equipment according to the project requirements.

Testing can help identify continuity errors, incorrect wire mapping, excessive attenuation, crosstalk issues, and other installation-related problems.

Applications

• Cat6 structured cabling
• Gigabit Ethernet networks
• Office LAN installations
• Enterprise network infrastructure
• Commercial buildings
• Residential structured cabling
• Server rooms
• Data centers
• Telecommunications rooms
• Network cabinets
• IP surveillance networks
• VoIP networks
• Wireless access point cabling
• Network printer connections
• Workstation Ethernet outlets
• Corporate IT infrastructure
• ISP and telecommunications installations

Why Choose Rosenberger CP11-141-12-OR?

The Rosenberger Cat6 23AWG UTP Cable 305M | CP11-141-12-OR provides a professional bulk-cabling solution for structured Ethernet installations.

Its Cat6 category, 23 AWG conductor specification, four-pair UTP construction, orange jacket, and 305-meter bulk length make it suitable for large-scale permanent network cabling projects in offices, commercial buildings, server rooms, data centers, and enterprise environments.

Buy Rosenberger Cat6 23AWG UTP Cable 305M in Bangladesh

The Rosenberger Cat6 23AWG UTP Cable 305M | CP11-141-12-OR is suitable for network installers, structured-cabling contractors, IT professionals, system integrators, offices, businesses, data centers, server rooms, educational institutions, and enterprise network projects in Bangladesh.

Before purchasing, confirm the required cable category, conductor gauge, UTP construction, jacket requirements, installation environment, and applicable project standards.

Why Buy from Independent Tech BD?

• Networking & IT Products
• Structured Cabling Solutions
• Rosenberger Networking Components
• Cat6 and Cat6A Network Cabling
• Patch Panels and Modular Jacks
• Rack & Data Center Solutions
• Competitive Price in Bangladesh
• Enterprise IT Solutions
• Corporate & Project Supply
• Technical Assistance
• Product Compatibility Support
• Nationwide Delivery
• Reliable After-Sales Service

Independent Tech BD supplies Rosenberger Cat6 cables, Cat6A cables, patch cords, patch panels, modular jacks, faceplates, cable managers, fiber-optic products, network switches, routers, racks, and structured-cabling accessories for home, office, corporate, ISP, and enterprise network installations.

Frequently Asked Questions

What is the Rosenberger CP11-141-12-OR?

The CP11-141-12-OR is a Rosenberger Cat6 23AWG UTP network cable supplied in a 305-meter bulk length with an orange jacket.

What category is this Rosenberger cable?

It is a Cat6 structured Ethernet cable.

What is the conductor gauge?

The specified conductor gauge is 23 AWG.

Is the cable UTP?

Yes. It is an Unshielded Twisted Pair (UTP) network cable.

How long is the cable?

The cable is supplied in a 305-meter bulk length.

What color is the Rosenberger CP11-141-12-OR?

The cable has an orange jacket.

Can I use this cable for Gigabit Ethernet?

Yes. Cat6 UTP cable is suitable for Gigabit Ethernet applications when used with compatible Cat6 components throughout the complete cabling channel.

Is this cable suitable for permanent installation?

Yes. The bulk cable format is intended for permanent structured-cabling and horizontal cable runs.

Can I use it with a Cat6 patch panel?

Yes. It can be terminated at a compatible Cat6 patch panel as part of a structured Ethernet system.

Can I use it with a Cat6 keystone jack?

Yes. A compatible Cat6 RJ45 keystone jack can be used to terminate the cable at a wall outlet or modular patch panel.

Can I use this cable for IP cameras?

Yes. It can be used as permanent Ethernet cabling for compatible IP camera systems. For PoE cameras, the complete cabling channel and network equipment must support the required PoE application.

Can I use this cable for Wi-Fi access points?

Yes. It can provide permanent Ethernet connectivity to compatible wireless access points. PoE requirements must be supported by the connected network infrastructure.

Can I use it for VoIP phones?

Yes. Cat6 UTP structured cabling is suitable for compatible IP phone and VoIP installations.

What is the difference between 23 AWG and 24 AWG?

23 AWG conductors are slightly larger than 24 AWG conductors. The appropriate cable should be selected according to the required electrical characteristics, installation requirements, and compatibility with the selected termination hardware.

What is the benefit of 305-meter bulk cable?

A 305-meter bulk length allows installers to create multiple permanent cable runs from the same cable supply, making it suitable for larger structured-cabling projects.

Does the cable come with RJ45 connectors?

No. This is a 305-meter bulk network cable. RJ45 plugs, keystone jacks, and patch panels are separate components selected according to the installation requirements.

Does the cable include a patch panel?

No. The CP11-141-12-OR is the bulk network cable only.

Can I use this cable as a patch cord?

The cable is primarily intended for permanent structured cabling. Factory-terminated flexible patch cords are generally preferred for connections between network equipment and outlets or patch panels.

What wiring standard should I use?

The cable can be terminated according to the applicable T568A or T568B wiring scheme. The selected scheme should be applied consistently throughout the relevant installation.

Should the cable be tested after installation?

Yes. Professional structured-cabling installations should be tested using appropriate cable verification or certification equipment according to the project's requirements.

Can I use this cable in a server room?

Yes. It can be used as part of a compatible structured Ethernet installation in server rooms and telecommunications rooms.

Can I use it in a data center?

Yes, for compatible Cat6 copper structured-cabling applications. Data-center deployments should consider routing, bend radius, cable density, airflow, labeling, and performance requirements.

Where can I buy Rosenberger Cat6 23AWG UTP Cable 305M in Bangladesh?

The Rosenberger CP11-141-12-OR 305M Cat6 UTP Cable can be sourced through professional networking and structured-cabling suppliers in Bangladesh, including Independent Tech BD.