Teltonika TSW210 Industrial Unmanaged Gigabit Ethernet Switch with 2 SFP Ports
The Teltonika TSW210 is an industrial unmanaged Gigabit Ethernet switch designed to provide reliable and straightforward network connectivity in demanding industrial and professional environments. It combines 8 Gigabit Ethernet ports with 2 SFP ports, allowing multiple Ethernet devices to be connected while also providing fiber-optic uplink options for longer-distance communication.
Unlike managed industrial switches, the TSW210 is designed for plug-and-play operation and does not require additional network configuration for basic switching. This makes it suitable for installations where simple, dependable Gigabit connectivity is required.
8-Port Gigabit Ethernet Connectivity
The TSW210 provides 8 × RJ45 Gigabit Ethernet ports supporting 10/100/1000 Mbps operation. Auto MDI/MDIX allows connected Ethernet devices to communicate without requiring special crossover cables.
With 8 Gigabit copper ports, the switch can connect industrial controllers, computers, servers, cameras, automation equipment, network gateways, and other Ethernet-enabled devices within the same network.
Dual SFP Fiber Connectivity
The switch includes 2 × SFP ports for compatible optical networking modules. SFP connectivity provides a flexible way to establish fiber-based uplinks and connect devices over longer distances while maintaining high-speed network communication.
Fiber uplinks can also be useful in industrial environments where electrical isolation between network segments is desirable or where copper Ethernet cabling cannot provide the required distance.
Industrial Unmanaged Design
The TSW210 is an unmanaged industrial Ethernet switch. Its plug-and-play design allows connected devices to communicate without requiring configuration through a web interface, command line, or dedicated management platform.
This straightforward architecture makes it suitable for industrial networks where the primary requirement is reliable Layer 2 Ethernet connectivity rather than advanced VLAN, routing, or centralized switch-management functions.
Technical Specifications
| Brand | Teltonika Networks |
| Model | TSW210 |
| Product Type | Industrial Unmanaged Gigabit Ethernet Switch |
| Ethernet Ports | 8 × RJ45, 10/100/1000 Mbps |
| SFP Ports | 2 × SFP |
| Switching Bandwidth | 20 Gbps, non-blocking |
| Packet Buffer | 128 KB |
| MAC Address Table | 2K entries |
| Jumbo Frame Support | 9216 bytes |
| Ethernet Standards | IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.3az |
| Auto MDI/MDIX | Yes |
| Power Connector | 2-pin industrial DC power socket |
| Input Voltage | 7–57 VDC |
| Maximum Power Consumption | Approximately 3.71W |
| Housing | Full Aluminum |
| Dimensions | 132 × 44.2 × 95.1 mm |
| Weight | Approx. 500 g |
| Operating Temperature | -40°C to 75°C |
| Operating Humidity | 10%–90% non-condensing |
| Ingress Protection | IP30 |
| Mounting | DIN Rail / Wall / Flat Surface |
Teltonika's published datasheet specifies 20 Gbps non-blocking bandwidth, a 128 KB packet buffer, a 2K MAC address table, and jumbo-frame support up to 9216 bytes.
Industrial-Grade Construction
The TSW210 uses a full aluminum housing designed for industrial applications. Its operating temperature range of -40°C to 75°C allows deployment in environments with significant temperature variation. The switch also has an IP30 ingress protection rating.
The rugged enclosure and compact form factor make the TSW210 suitable for control cabinets, industrial machinery areas, manufacturing facilities, energy installations, transportation infrastructure, and other professional network environments.
DIN-Rail and Surface Mounting
The TSW210 includes an integrated DIN-rail mounting option and can also be installed on a wall or flat surface with the appropriate mounting arrangement. This provides flexibility when integrating the switch into industrial cabinets or network enclosures.
Wide DC Power Input
The switch accepts a wide 7–57 VDC input range through a 2-pin industrial DC power connector. This makes it suitable for various industrial power environments where low-voltage DC power is available.
Teltonika documents approximately 1.03W maximum idle consumption at the upper end of the specified input range and approximately 3.71W under its maximum tested operating condition.
Network Performance
The TSW210 provides 20 Gbps of non-blocking switching bandwidth, allowing its Gigabit interfaces to handle network traffic efficiently. The switch also supports a 2K MAC address table and 9216-byte jumbo frames.
These capabilities make it suitable for Gigabit industrial networks where multiple Ethernet devices need to communicate simultaneously and where larger Ethernet frames may be useful in compatible network environments.
Fiber Uplink Applications
The two SFP ports can be used to establish fiber connections between the TSW210 and other compatible network equipment. Depending on the selected SFP modules and fiber infrastructure, this can support long-distance links beyond the practical reach of standard copper Ethernet connections.
Fiber connectivity is particularly useful in industrial facilities with geographically separated equipment, electrically noisy environments, or network segments where optical isolation is preferred.
Applications
- Industrial Ethernet networking
- Factory automation networks
- Manufacturing facilities
- Industrial control systems
- Machine-to-machine networking
- Industrial IoT infrastructure
- Solar and renewable energy installations
- Transportation infrastructure
- Security and surveillance networks
- Fiber-connected industrial networks
- Control cabinet networking
- Remote industrial equipment connectivity
Compatibility and Installation Considerations
The TSW210 is an unmanaged switch, so connected devices can generally be connected directly without switch configuration. However, the wider network should still be designed with appropriate IP addressing, cabling, fiber transceivers, and network topology.
For copper connections, Teltonika specifies a maximum Ethernet cable length of 100 meters. For longer-distance connections, compatible SFP modules and fiber cabling should be selected according to the required transmission distance, fiber type, wavelength, and connector configuration.
When installing the switch in an industrial cabinet, ensure that the power source is within the specified 7–57 VDC range and that the operating temperature and humidity remain within the documented limits.
Why Choose Teltonika TSW210?
The Teltonika TSW210 provides a combination of 8-port Gigabit Ethernet connectivity, dual SFP fiber interfaces, rugged aluminum construction, wide DC voltage support, and industrial mounting options. Its unmanaged plug-and-play architecture keeps installation straightforward while its 20 Gbps switching bandwidth supports demanding Gigabit Ethernet environments.
It is particularly suitable for industrial networks where reliable Ethernet connectivity, fiber uplinks, compact installation, and wide environmental tolerance are more important than advanced managed-switch features.
Frequently Asked Questions
What is the Teltonika TSW210?
The Teltonika TSW210 is an industrial unmanaged Gigabit Ethernet switch with 8 RJ45 Gigabit Ethernet ports and 2 SFP ports for fiber connectivity.
Is the TSW210 a managed switch?
No. The TSW210 is officially an unmanaged industrial Ethernet switch designed for plug-and-play operation.
How many Ethernet ports does the TSW210 have?
It has 8 RJ45 Ethernet ports supporting 10/100/1000 Mbps Gigabit Ethernet.
Does the TSW210 have SFP ports?
Yes. It has 2 SFP ports for compatible fiber-optic networking modules.
What is the switching capacity of the TSW210?
The TSW210 provides 20 Gbps of non-blocking switching bandwidth.
Does the TSW210 support PoE?
No. The TSW210 is not a PoE switch. It is a standard industrial Gigabit Ethernet switch. For industrial PoE applications, Teltonika offers other TSW-series models with PoE functionality.
What voltage does the TSW210 use?
The published datasheet specifies a 7–57 VDC input range through a 2-pin industrial DC power socket.
Can the TSW210 be mounted on a DIN rail?
Yes. The TSW210 supports DIN-rail mounting and also provides options for wall or flat-surface installation.
What is the operating temperature of the TSW210?
The documented operating temperature range is -40°C to 75°C.
Does the TSW210 support fiber connectivity?
Yes. Its two SFP ports can be used with compatible optical modules for fiber-based network connections and long-distance uplinks.
Is the TSW210 suitable for industrial environments?
Yes. Its aluminum housing, wide DC input range, DIN-rail mounting, IP30 rating, and -40°C to 75°C operating temperature range are designed for industrial networking applications.
What is the maximum copper Ethernet cable length?
Teltonika specifies a maximum Ethernet cable length of 100 meters for the TSW210.
Can the TSW210 be used for factory automation?
Yes. Teltonika specifically positions the TSW210 for industrial applications, including manufacturing environments where multiple Gigabit Ethernet devices and fiber uplinks need to be interconnected.
