Teltonika TSW200 Industrial Unmanaged PoE+ Switch
The Teltonika TSW200 is an industrial unmanaged Gigabit Ethernet switch designed for professional networking, industrial automation, surveillance, transportation, and other demanding connectivity applications. It combines 8 Gigabit Ethernet PoE+ ports with 2 SFP ports, providing both high-speed copper connectivity and fiber-optic uplink capability.
All eight Ethernet ports support IEEE 802.3af and 802.3at PoE standards and can provide up to 30W per port. The switch offers a total PoE power budget of up to 240W, allowing multiple compatible devices to receive power and data through a single Ethernet cable.
Industrial Gigabit Ethernet Connectivity
The TSW200 provides eight RJ45 Ethernet ports supporting 10/100/1000 Mbps operation. Auto MDI/MDIX allows compatible network devices to be connected without requiring special crossover cables. The switch provides a non-blocking bandwidth capacity of 20 Gbps for efficient traffic handling across its interfaces.
PoE+ Power over Ethernet
Eight Ethernet ports support IEEE 802.3af and IEEE 802.3at PoE+. Each PoE port can provide up to 30W at the power sourcing equipment (PSE), while the overall PoE budget can reach 240W. This allows compatible IP cameras, wireless access points, VoIP equipment, and other PoE devices to receive both network connectivity and electrical power through Ethernet cabling.
The PoE output requires an appropriate DC power source. Teltonika specifies a PoE-out input voltage range of 44–57 VDC; when powered below the required voltage range, the switch can operate as a standard Ethernet switch without PoE functionality.
Dual SFP Fiber Uplinks
The TSW200 includes 2 SFP ports for fiber-optic connectivity. These ports can be used to connect the switch to other network switches, aggregation equipment, or remote network segments where fiber is preferred for distance, electrical isolation, or network infrastructure requirements.
Using SFP uplinks can also help extend network connectivity beyond the typical copper Ethernet cable limitation. Teltonika's documented maximum Ethernet cable length for the TSW200 is 100 meters.
Technical Specifications
| Brand | Teltonika Networks |
| Model | TSW200 |
| Product Type | Industrial Unmanaged PoE+ Ethernet Switch |
| Ethernet Ports | 8 × RJ45, 10/100/1000 Mbps |
| SFP Ports | 2 × SFP |
| PoE Ports | Port 1–8 |
| PoE Standards | IEEE 802.3af / 802.3at |
| Maximum PoE per Port | 30W |
| Total PoE Budget | Up to 240W |
| Switching Bandwidth | 20 Gbps, non-blocking |
| Packet Buffer | 128 KB |
| MAC Address Table | 2K entries |
| Jumbo Frame | 9216 bytes |
| Power Input | 7–57 VDC |
| PoE Input Voltage | 44–57 VDC |
| Housing | Full Aluminium |
| Dimensions | 132 × 44.2 × 95.1 mm |
| Weight | Approx. 517 g |
| Operating Temperature | -40°C to 75°C |
| Operating Humidity | 10%–90% non-condensing |
| Ingress Protection | IP30 |
| Mounting | DIN Rail / Wall Mount / Flat Surface |
Specifications above are based on Teltonika's current published TSW200 documentation. The manufacturer notes that specifications may change without prior notice.
Rugged Industrial Design
The TSW200 is built with a full aluminium housing and is designed for industrial environments. It supports an operating temperature range of -40°C to 75°C, with 10%–90% non-condensing operating humidity and an IP30 enclosure rating.
The integrated DIN-rail mounting bracket makes the switch suitable for installation inside industrial control cabinets, electrical enclosures, automation panels, and other structured industrial environments. Wall mounting is also supported with an appropriate mounting solution.
Unmanaged Plug-and-Play Operation
The TSW200 is an unmanaged Ethernet switch, meaning it is designed for straightforward plug-and-play network connectivity without requiring a management interface for basic operation. This can simplify deployment in industrial installations where reliable connectivity and PoE power delivery are the primary requirements.
Network Performance
The switch provides 20 Gbps non-blocking bandwidth, a 128 KB packet buffer, a 2K-entry MAC address table, and support for jumbo frames up to 9216 bytes. These specifications provide the switching capacity needed for Gigabit Ethernet traffic across connected industrial and business devices.
PoE for Surveillance and Wireless Networks
The TSW200 is suitable for powering compatible PoE devices such as IP surveillance cameras and wireless access points. Teltonika specifically demonstrates the switch in surveillance deployments where multiple CCTV cameras and access points can be connected and powered from the eight PoE+ ports.
The 240W total PoE budget provides flexibility when multiple powered devices are deployed, although the combined device requirements must remain within the available power budget.
Hardware Revision and PoE Compatibility
Teltonika introduced a TSW200 hardware revision beginning in Q4 2024 that changed the PoE implementation from Alternative B to PoE Alternative A and recessed the SFP connector by 3 mm. Teltonika states that the SFP change does not affect functionality or performance.
When purchasing or replacing an existing TSW200, checking the hardware revision or order code is recommended if PoE pinout compatibility is important to the installation.
Power Requirements
The TSW200 accepts a wide 7–57 VDC input range. For PoE operation, Teltonika specifies that the power supply should provide 44 VDC or higher. The switch uses a 2-pin industrial DC power connector.
This wide input-voltage range makes the switch suitable for various industrial power environments, including installations where a conventional AC-powered network switch may not be practical.
Applications
- Industrial Ethernet networking
- Industrial automation systems
- IP surveillance and CCTV networks
- PoE IP camera installations
- Wireless access point deployments
- Factory and manufacturing networks
- Transportation infrastructure
- Smart city networking
- Remote monitoring systems
- Industrial control cabinets
- Fiber-connected network segments
- IoT and industrial IoT infrastructure
Installation and Compatibility Considerations
For PoE operation, use a suitable DC power source within the supported voltage range and capable of providing the required total power. Teltonika specifies 44–57 VDC for proper PoE operation.
Each connected PoE device should be checked for IEEE 802.3af or 802.3at compatibility and power requirements. The combined PoE load should remain within the 240W total budget and individual ports should not exceed their specified 30W maximum.
For fiber connectivity, select SFP modules compatible with the intended fiber type, wavelength, connector, and transmission distance. Fiber installation should follow the transceiver manufacturer's optical specifications.
Why Choose Teltonika TSW200?
The Teltonika TSW200 combines industrial construction, Gigabit Ethernet, PoE+, and SFP fiber connectivity in a compact unmanaged switch. Its eight PoE+ ports can provide up to 30W per port, while the 240W total PoE budget supports multiple powered network devices. Dual SFP ports provide additional flexibility for fiber-based network links.
Its wide operating temperature range, aluminium housing, DIN-rail mounting, wide DC input range, and industrial-oriented design make it suitable for professional networking installations where environmental conditions and dependable connectivity are important.
Frequently Asked Questions
What is the Teltonika TSW200?
The Teltonika TSW200 is an industrial unmanaged Gigabit Ethernet switch with eight PoE+ RJ45 ports and two SFP ports for fiber-optic connectivity.
How many PoE ports does the TSW200 have?
The TSW200 has eight PoE+ Ethernet ports. All eight RJ45 Ethernet ports support IEEE 802.3af and IEEE 802.3at PoE standards.
How much power can the TSW200 provide per port?
Each PoE port can provide up to 30W at the PSE.
What is the total PoE budget of the TSW200?
The maximum total PoE power budget is 240W.
Does the TSW200 have SFP ports?
Yes. It has two SFP ports for fiber-optic network connections and longer-distance uplinks.
Is the TSW200 a managed switch?
No. The TSW200 is an unmanaged industrial Ethernet switch designed for plug-and-play connectivity.
What is the switching capacity of the TSW200?
The TSW200 provides 20 Gbps of non-blocking switching bandwidth.
What is the operating temperature of the TSW200?
The documented operating temperature range is -40°C to 75°C.
Can the TSW200 be installed on a DIN rail?
Yes. The switch has an integrated DIN-rail mounting bracket. Wall mounting and flat-surface placement are also supported with the appropriate mounting arrangement.
What voltage does the TSW200 require?
The switch accepts 7–57 VDC input. For PoE operation, Teltonika specifies a PoE input voltage range of 44–57 VDC.
Can the TSW200 power IP cameras?
Yes. Compatible IEEE 802.3af/at PoE cameras can receive both data and power from the switch. Teltonika documents the TSW200 for surveillance applications with multiple PoE cameras.
Can the TSW200 power WiFi access points?
Yes. Compatible IEEE 802.3af/at PoE access points can be connected to its PoE+ ports and powered directly through Ethernet.
Is the TSW200 suitable for industrial environments?
Yes. Its aluminium housing, -40°C to 75°C operating range, IP30 rating, wide DC input range, and DIN-rail mounting are designed for industrial networking environments.
-120x80h.png "TP-Link Archer BE230 BE3600 Dual-Band WiFi 7 Router")