Rosenberger 3M Patch Cord | CP61-423-1P3

Overview of Rosenberger 3M Cat6 Patch Cord

The Rosenberger CP61-423-1P3 is a 3-meter Cat6 Ethernet patch cord designed for reliable connections between network equipment and structured cabling components. It is suitable for connecting patch panels, network switches, routers, wall outlets, computers, servers, IP phones, access points, and other compatible Ethernet devices.

With a 3-meter cable length, the patch cord provides additional flexibility for installations where network equipment is positioned farther apart within a rack, cabinet, workstation, or network area.

The patch cord is designed for use with Cat6 structured cabling systems and is suitable for Gigabit Ethernet and other compatible Ethernet applications when used with an appropriate complete cabling channel.

Key Features

• 3-Meter Length: Provides additional reach for connections between network devices and structured cabling components.
• Cat6 Performance: Designed for Cat6 Ethernet networking applications.
• RJ45 Connectivity: Suitable for standard RJ45 Ethernet connections between compatible network equipment.
• 4-Pair Ethernet Cable: Uses four twisted pairs for standard Ethernet connectivity.
• Flexible Network Connection: Suitable for connecting patch panels, switches, routers, servers, computers, and network outlets.
• Rack and Workstation Applications: Suitable for both network-rack and end-user equipment connections.
• Gigabit Ethernet: Suitable for Gigabit Ethernet applications when the complete network channel supports the required specification.
• Structured Cabling Compatibility: Designed to work as part of a compatible Cat6 structured cabling system.
• Professional Networking: Suitable for data centers, server rooms, offices, commercial buildings, and enterprise networks.
• Organized Cabling: Helps create clean and manageable connections between active network equipment and passive cabling components.

Technical Specifications

Cat6 Ethernet Patch Cord

The Rosenberger CP61-423-1P3 is designed as a Cat6 patch cord for connecting active network devices to passive structured-cabling components.

Patch cords are commonly used at both ends of structured cabling channels. They provide a convenient connection between patch-panel ports, switch ports, wall outlets, servers, computers, and other Ethernet equipment.

3-Meter Cable Length

The 3-meter length provides greater flexibility than shorter patch cords. It can be useful when equipment is separated by several rack units or when a network device is positioned away from the patch panel or wall outlet.

The appropriate cable length should be selected to provide sufficient reach while avoiding unnecessary cable slack that can complicate cable management.

RJ45 Ethernet Connectivity

The patch cord is designed for standard RJ45 Ethernet connectivity. It can be used to connect compatible RJ45 network ports on switches, routers, computers, servers, patch panels, wall outlets, access points, IP phones, and other Ethernet equipment.

Both ends of a typical Ethernet patch cord are terminated for direct connection between compatible RJ45 interfaces.

Gigabit Ethernet Applications

Cat6 patch cords are widely used in Gigabit Ethernet network installations. When combined with compatible Cat6 cabling components and Gigabit-capable network equipment, the patch cord can be part of a high-speed Ethernet channel.

Actual network performance depends on the complete cabling channel, connected devices, network hardware, and installation quality.

Patch Panel to Switch Connection

One of the most common uses for the Rosenberger 3M patch cord is connecting a patch panel to a network switch inside a rack or network cabinet.

The 3-meter length can provide useful flexibility when the patch panel and switch are installed at different rack positions.

Patch Panel to Network Device

The patch cord can also connect a patch-panel port to another compatible network device where a longer patch connection is required.

This is useful in structured network installations where permanent horizontal cabling terminates at a patch panel and shorter or longer patch cords are used to connect active equipment.

Workstation Connectivity

The CP61-423-1P3 can be used to connect a workstation, computer, docking station, IP phone, printer, or other Ethernet device to a network wall outlet.

The 3-meter length can be useful for workstations where the network outlet and equipment are not positioned directly next to each other.

Server Room Applications

In server rooms and network cabinets, the patch cord can be used to connect switches, servers, patch panels, routers, firewalls, and other network infrastructure.

Proper cable routing and labeling are recommended to keep larger installations organized and easier to maintain.

Data Center Applications

The patch cord can be used in compatible structured-cabling environments such as server rooms and data centers for Ethernet equipment interconnections.

When used in high-density environments, cable-management practices should be followed to avoid excessive cable congestion and maintain serviceability.

Office Network Applications

Office networks can use the Rosenberger Cat6 patch cord to connect computers, printers, IP phones, access points, switches, and other Ethernet devices.

The 3-meter length provides additional flexibility for workstation and equipment placement.

Access Point Connectivity

Compatible wireless access points can be connected to structured Ethernet outlets or switches using the patch cord.

If the access point uses Power over Ethernet, the complete Ethernet connection must be connected to a PoE-capable switch or suitable PoE injector.

IP Camera Applications

The patch cord can be used for Ethernet connectivity to compatible IP cameras, network video recorders, switches, and structured cabling outlets.

For PoE camera systems, the network equipment and complete cabling channel should be compatible with the required PoE standard and power requirements.

VoIP Applications

The CP61-423-1P3 can be used to connect compatible IP phones to network switches, wall outlets, or structured cabling systems.

For PoE-powered IP phones, the required PoE power must be provided by the network infrastructure.

Network Storage Connectivity

Compatible NAS devices and network storage systems can be connected using the Cat6 patch cord.

This can provide the wired Ethernet connection required for file sharing, backups, media access, and other network-storage applications.

Router and Switch Connectivity

The patch cord can be used to connect compatible routers, switches, firewalls, and other Ethernet networking devices.

It can also be used as an interconnection cable within a structured network rack where the distance between network components requires a 3-meter cable.

Structured Cabling System

A structured Ethernet installation typically consists of permanent horizontal cabling, patch panels, faceplates or outlets, patch cords, and active network equipment.

The Rosenberger CP61-423-1P3 functions as the flexible patch-cord portion of this type of network infrastructure.

Cable Management

The 3-meter length provides installation flexibility, but cable management becomes particularly important when longer patch cords are used in network racks.

Excess cable should be routed neatly using suitable cable-management accessories rather than tightly coiled or sharply bent around network equipment.

Network Performance Considerations

The Cat6 designation applies to the cable's intended performance category. However, the performance of a complete Ethernet connection depends on every component in the channel.

For reliable Cat6 performance, the patch cord should be combined with compatible Cat6 patch panels, keystone jacks, permanent cable, outlets, and network equipment.

Ethernet Cable Length

A 3-meter patch cord is useful for equipment interconnection but should not be confused with the maximum allowable length of an entire structured Ethernet channel.

When designing a structured cabling system, the permanent cable and patch-cord lengths should be considered together according to the applicable cabling standard.

Applications

• Patch panel to switch connections
• Switch to router connections
• Router to firewall connections
• Computer to network outlet connections
• Server to switch connections
• NAS to switch connections
• IP phone connections
• IP camera connections
• Wireless access point connections
• Office workstation networking
• Server room networking
• Data center Ethernet connectivity
• Structured cabling installations
• Home networking
• Enterprise LAN installations

Professional Network Cabling

Rosenberger patch cords are designed for professional connectivity applications where reliable and organized network cabling is required.

The CP61-423-1P3 provides a 3-meter connection option for network installers and IT professionals working with structured Ethernet infrastructure.

Patch Cord vs Permanent Network Cable

A patch cord is designed for flexible equipment connections and is generally used between network equipment, patch panels, and outlets. Permanent horizontal cable is typically installed inside walls, ceilings, cable trays, or other building infrastructure.

The CP61-423-1P3 is intended for flexible patching and equipment connectivity rather than replacing permanent structured cabling.

Installation Considerations

Use the patch cord with compatible RJ45 Ethernet ports and avoid excessive bending, crushing, pulling, or tightly bundling the cable.

For rack installations, use suitable horizontal or vertical cable-management accessories to maintain a clean and serviceable network cabinet.

Why Choose the Rosenberger CP61-423-1P3?

The Rosenberger CP61-423-1P3 3M Cat6 Patch Cord provides a practical combination of Cat6 networking capability and a 3-meter cable length for flexible Ethernet equipment connections.

It is suitable for structured cabling, network racks, offices, server rooms, workstations, data centers, and enterprise LAN installations where a longer RJ45 patch connection is required.

Buy Rosenberger CP61-423-1P3 3M Patch Cord in Bangladesh

The Rosenberger 3M Cat6 Patch Cord | CP61-423-1P3 is suitable for network installers, IT professionals, system integrators, structured-cabling contractors, offices, businesses, server rooms, and enterprise network installations in Bangladesh.

Before purchasing, confirm the required cable category, length, connector type, cable construction, and compatibility with the existing patch panel and network equipment.

Why Buy from Independent Tech BD?

• Networking & IT Products
• Structured Cabling Solutions
• Rosenberger Networking Components
• Competitive Price in Bangladesh
• Enterprise IT Solutions
• Corporate & Project Supply
• Technical Assistance
• Product Compatibility Support
• Nationwide Delivery
• Reliable After-Sales Service

Independent Tech BD supplies Rosenberger patch cords, Cat6 and Cat6A cables, modular jacks, faceplates, patch panels, fiber-optic products, network switches, routers, racks, and structured-cabling accessories for home, office, corporate, ISP, and enterprise network installations.

Frequently Asked Questions

What is the Rosenberger CP61-423-1P3?

The CP61-423-1P3 is a Rosenberger 3-meter Cat6 Ethernet patch cord designed for structured network and equipment connections.

What is the length of the Rosenberger CP61-423-1P3?

The patch cord has a 3-meter length.

What category is the CP61-423-1P3?

It is a Cat6 patch cord designed for compatible Ethernet networking applications.

What connector does the patch cord use?

It is designed for standard RJ45 Ethernet connectivity.

Can I use this patch cord for Gigabit Ethernet?

Yes. It is suitable for Gigabit Ethernet applications when used with compatible Cat6 cabling and network equipment.

Can I connect a patch panel to a switch with this cable?

Yes. Patch panel-to-switch connections are one of the common applications for a Cat6 patch cord.

Can I connect a computer to a network wall outlet?

Yes. The patch cord can be used to connect a compatible computer or other Ethernet device to an RJ45 network outlet.

Can I use this cable for an IP camera?

Yes. It can provide Ethernet connectivity for compatible IP cameras. If the camera uses PoE, the network infrastructure must provide the required PoE power.

Can I use this cable for a Wi-Fi access point?

Yes. It can be used as an Ethernet connection between a compatible access point and switch or structured network outlet.

Can I use this patch cord for an IP phone?

Yes. It can be used for compatible VoIP/IP phone Ethernet connections. PoE power, if required, must be supplied by the network infrastructure.

Is a 3-meter patch cord suitable for a server rack?

Yes. The 3-meter length can be useful when patch panels and switches are positioned farther apart within a rack or when additional routing flexibility is required.

What is the difference between a patch cord and a network cable?

A patch cord is generally used for flexible connections between network equipment, patch panels, and outlets, while permanent network cable is typically installed as part of the building's structured cabling infrastructure.

Does the patch cord determine the complete network speed?

No. Network performance depends on the complete cabling channel, including the patch cord, permanent cable, connectors, patch panels, and network equipment.

Where can I use the Rosenberger 3M Cat6 Patch Cord?

It can be used in offices, homes, server rooms, data centers, network racks, workstations, commercial buildings, and enterprise LAN environments.

Where can I buy the Rosenberger CP61-423-1P3 in Bangladesh?

The Rosenberger CP61-423-1P3 3M Cat6 Patch Cord can be sourced through professional networking and structured-cabling suppliers in Bangladesh, including Independent Tech BD.