MikroTik 25G SFP+ 3M Direct Attach Cable | XS+DA0003
The MikroTik XS+DA0003 is a 3-meter Direct Attach Cable (DAC) designed for high-speed networking applications. Unlike traditional SFP+ cables limited to 1G and 10G, the XS+DA0003 also supports the 25G SFP28 standard, making it suitable for modern high-performance network infrastructure.
MikroTik specifies the XS+DA0003 for connecting compatible SFP, SFP+ and SFP28 devices over very short distances, including connections within the same rack and across adjacent racks. It provides a low-cost, low-power and low-latency interconnect solution for 25-Gigabit Ethernet, Fibre Channel and other industry standards.
MikroTik XS+DA0003 25G Direct Attach Cable
The XS+DA0003 combines the cable and transceiver interfaces into one integrated direct-attach assembly. This makes it a convenient solution for connecting compatible high-speed networking equipment without requiring separate optical modules and fiber patch cables for short-distance connections.
25G SFP28 Support
The key advantage of the XS+DA0003 is its support for 25G SFP28 connectivity. It is designed to support modern 25-Gigabit Ethernet infrastructure while also maintaining compatibility with 1G and 10G operation where supported by the connected devices.
MikroTik specifies a data-rate range of 1G / 10G / 25G for this cable.
3 Meter Cable Length
The XS+DA0003 provides a 3-meter cable length, giving additional flexibility for rack-based installations. It is suitable for connecting devices positioned farther apart within the same rack or between adjacent racks.
SFP to SFP28 Connectivity
The XS+DA0003 is designed to connect compatible SFP, SFP+ and SFP28 devices. This makes it useful for network environments containing a combination of Gigabit, 10-Gigabit and 25-Gigabit interfaces, provided the connected equipment supports the required cable and operating speed.
Low-Latency Network Interconnect
Direct Attach Cables are designed for short-distance connections and provide an integrated alternative to separate transceivers and fiber cabling. MikroTik describes the XS+DA0003 as a low-cost, low-power and low-latency interconnect solution.
Ideal for 25 Gigabit Ethernet
The XS+DA0003 is particularly suitable for 25GbE network infrastructure, including high-speed switches, routers, servers and other networking devices equipped with compatible SFP28 ports.
It can be used for high-bandwidth connections where the short physical distance makes a direct-attach cable more practical than an optical fiber solution.
Suitable for Data Centers and Server Rooms
The 3-meter length makes the XS+DA0003 suitable for data-center and server-room environments where equipment is installed in racks or adjacent racks. Its integrated design can also help simplify rack cabling by reducing the number of separate components required for a short-distance link.
Fiber Channel Support
MikroTik also identifies the XS+DA0003 as a low-power and low-latency interconnect solution for Fibre Channel and other industry standards, in addition to 25-Gigabit Ethernet.
SFP+ MSA Compliance
The XS+DA0003 is described by MikroTik as direct-attach compliant and fully conforming to the SFP+ MSA specifications. This supports its use with compatible SFP/SFP+/SFP28 networking equipment following the applicable interface requirements.
Technical Specifications
| Brand | MikroTik |
| Model | XS+DA0003 |
| Product Code | XS+DA0003 |
| Product Type | Direct Attach Cable |
| Interface Standard | SFP / SFP+ / SFP28 |
| Data Rate | 1G / 10G / 25G |
| Cable Length | 3 meters |
| Application | Very short-distance network interconnection |
| Compliance | Direct Attach / SFP+ MSA |
| MTBF | Approximately 100,000 hours at 25°C |
MikroTik's official product page lists the XS+DA0003 with a 3-meter cable length, 1G/10G/25G data rate and approximately 100,000 hours MTBF at 25°C.
Applications
- 25 Gigabit Ethernet networking
- 10 Gigabit Ethernet connections
- 1 Gigabit Ethernet connections
- Switch-to-switch connections
- Router-to-switch connections
- Server-to-switch connections
- High-speed server networking
- Data center infrastructure
- Server room networking
- Same-rack interconnections
- Adjacent-rack connections
- Fibre Channel applications
- Network laboratory environments
- High-performance network backbones
Compatibility Considerations
Before purchasing the XS+DA0003, verify that both connected devices support the required SFP/SFP+/SFP28 interface and operating speed. Actual link speed depends on the capabilities and compatibility of the connected equipment.
The XS+DA0003 is particularly useful when connecting devices with 25G SFP28 interfaces, while also supporting 1G and 10G data rates according to MikroTik's specification.
Why Choose MikroTik XS+DA0003?
The MikroTik XS+DA0003 is an excellent choice for users who need a high-speed direct-attach connection with support for the latest 25G SFP28 standard. Its ability to operate at 1G, 10G and 25G makes it more versatile than traditional 10G-only direct attach cables.
The 3-meter length provides useful flexibility for rack installations, while the integrated direct-attach design helps provide a simple, low-power and low-latency connection between compatible network devices.
Frequently Asked Questions
What is MikroTik XS+DA0003?
MikroTik XS+DA0003 is a 3-meter direct attach cable designed to connect compatible SFP, SFP+ and SFP28 networking devices.
Does XS+DA0003 support 25G?
Yes. The XS+DA0003 supports the 25G SFP28 standard.
What speeds does XS+DA0003 support?
The official specification lists 1G, 10G and 25G data rates.
What is the cable length?
The XS+DA0003 is 3 meters long.
Can XS+DA0003 be used for 10G networking?
Yes. It supports 10G operation in addition to 1G and 25G, subject to compatible equipment.
Can XS+DA0003 connect two 25G switches?
Yes, provided both switches have compatible SFP28 ports and support the cable and required 25G operating mode.
Is XS+DA0003 a fiber cable?
No. It is a Direct Attach Cable with integrated interfaces, designed for short-distance connections rather than a separate optical transceiver and fiber-patch-cable setup.
Where is XS+DA0003 commonly used?
It is suitable for data centers, server rooms, high-speed network racks, enterprise infrastructure, network laboratories and other environments requiring short-distance 25G/10G/1G connections.
What is the difference between XS+DA0003 and S+DA0003?
The S+DA0003 is a 3-meter direct attach cable supporting 1G/10G, while the XS+DA0003 adds support for 25G SFP28 while retaining 1G and 10G support.
