MikroTik 1M SFP+ Direct Attach Cable | S+DA0001
The MikroTik S+DA0001 is a 1-meter SFP+ Direct Attach Cable (DAC) designed to provide a simple, low-cost and low-latency connection between compatible SFP or SFP+ networking devices. It features SFP+ connectors on both ends and supports 1G and 10G data rates. MikroTik lists the cable as suitable for very short-distance connections within the same rack or between adjacent racks.
MikroTik S+DA0001 SFP+ Direct Attach Cable
The S+DA0001 combines the cable and SFP+ interfaces into a single direct-attach assembly. This eliminates the need for separate SFP+ transceiver modules and fiber patch cables for short network links, providing a practical interconnection solution for compatible networking equipment.
1 Meter Cable Length
With a 1-meter cable length, the S+DA0001 is particularly suitable for short connections inside network racks and between equipment positioned close to each other. Its compact length can also help keep rack cabling organized and reduce unnecessary cable slack.
SFP+ to SFP+ Connectivity
The S+DA0001 uses SFP+ to SFP+ connectors, allowing it to directly connect compatible devices equipped with SFP or SFP+ ports. MikroTik identifies it as a direct-attach compliant cable that conforms to the SFP+ MSA specifications.
1G and 10G Data Rate Support
MikroTik specifies the S+DA0001 with a 1G / 10G data rate. This makes it suitable for compatible network equipment operating at either 1 Gigabit or 10 Gigabit speeds, subject to the capabilities and compatibility of the connected devices.
Low-Latency Network Interconnection
Direct attach cables are designed for short-distance device-to-device connectivity and provide a low-power, low-latency alternative to using separate optical transceivers and fiber cabling for appropriate applications. MikroTik specifically describes the S+DA0001 as a low-cost, low-power and low-latency interconnect solution.
Ideal for Rack-to-Rack Connections
The S+DA0001 is intended for very short network links, including connections between devices installed in the same rack or in adjacent racks. It can be used for suitable switch-to-switch, router-to-switch and server-to-network-device connections when the equipment supports the required SFP/SFP+ interface and cable.
Direct Attach Cable Design
Unlike a conventional fiber connection that uses separate SFP+ transceiver modules and an optical fiber patch cord, a direct attach cable has the transceiver interfaces integrated into the ends of the cable. This makes the S+DA0001 a convenient option for short-distance interconnects where a fiber-based solution is unnecessary.
SFP+ MSA Compliance
MikroTik states that the S+DA0001 is direct-attach compliant and conforms to the SFP+ MSA specifications. This helps position the cable for use with compatible SFP+ networking equipment following the applicable interface requirements.
Technical Specifications
| Brand | MikroTik |
| Model | S+DA0001 |
| Product Code | S+DA0001 |
| Product Type | SFP+ Direct Attach Cable |
| Connector Type | SFP+ to SFP+ |
| Data Rate | 1G / 10G |
| Cable Length | 1 meter |
| Application | Short-distance network interconnection |
| Compliance | SFP+ MSA / Direct Attach compliant |
| MTBF | Approximately 100,000 hours at 25°C |
The specifications above are based on MikroTik's official S+DA0001 product information. MikroTik currently marks the S+DA0001 as discontinued; the newer XS+DA0001 is a 1-meter direct-attach cable supporting 1G, 10G and 25G SFP28.
Applications
- 10 Gigabit Ethernet connections
- 1 Gigabit Ethernet connections
- Switch-to-switch connections
- Router-to-switch connections
- Server-to-switch connections
- Short-distance SFP+ interconnections
- Same-rack networking
- Adjacent-rack networking
- Data center network connections
- Server room infrastructure
- High-speed network backbones
- Network laboratory environments
Why Choose MikroTik S+DA0001?
The MikroTik S+DA0001 is a practical choice for short-distance high-speed network connections where compatible SFP/SFP+ ports are available. Its integrated SFP+ connectors, 1-meter length and support for 1G and 10G make it particularly useful for rack-based network deployments.
For compatible equipment, it can provide a simpler and more economical alternative to deploying separate SFP+ modules and fiber patch cables for very short connections. MikroTik specifically positions the cable as a low-cost, low-power and low-latency solution.
Compatibility Considerations
Before purchasing, verify that both connected devices support the S+DA0001 and the required SFP/SFP+ operating speed. Compatibility can depend on the networking hardware, firmware and vendor-specific SFP/SFP+ support.
The S+DA0001 is a 1G/10G cable. It should not be confused with the newer XS+DA0001, which supports 1G, 10G and 25G SFP28 connections.
Frequently Asked Questions
What is MikroTik S+DA0001?
MikroTik S+DA0001 is a 1-meter SFP+ Direct Attach Cable designed for short-distance connections between compatible SFP/SFP+ networking devices.
What is the length of S+DA0001?
The cable is 1 meter long.
What connectors does S+DA0001 use?
It uses SFP+ to SFP+ connectors.
Does S+DA0001 support 10G?
Yes. MikroTik specifies support for 1G and 10G data rates.
Can S+DA0001 be used for 1G connections?
Yes. The official specification lists a data rate of 1G / 10G.
Where should I use S+DA0001?
It is designed for very short connections, particularly within network racks and between adjacent racks.
Is S+DA0001 a fiber cable?
No. It is a direct attach cable with SFP+ interfaces integrated into the cable ends, rather than a separate fiber patch cable used with detachable optical transceivers.
Is S+DA0001 suitable for switches?
Yes, provided the switches have compatible SFP/SFP+ ports and support the cable. It can be used for suitable short-distance switch interconnections.
What is the difference between S+DA0001 and XS+DA0001?
The older S+DA0001 supports 1G/10G, while the newer XS+DA0001 supports 1G/10G/25G and is designed for SFP28 as well as SFP/SFP+.
Is MikroTik S+DA0001 discontinued?
Yes. MikroTik currently lists the S+DA0001 as discontinued. Availability may therefore depend on existing distributor or reseller stock.
