Overview of Micronet SP1161S Cat6 24-Port Patch Panel
The Micronet SP1161S is a 24-port Cat6 UTP patch panel designed for structured Ethernet cabling installations. It provides a centralized point for terminating and organizing network cable connections, helping network installers and administrators maintain a clean and manageable wiring infrastructure.
The SP1161S features 24 ports, 110/Krone dual IDC termination, and support for both stranded and solid wires from 22 to 26 AWG. Its 45-degree jack design helps reduce strain on connected patch cables, while the modular construction provides flexibility for structured cabling installations.
With dimensions of approximately 43 × 483 × 52 mm, the patch panel is designed for professional network cabinets and structured cabling environments where organized high-density Ethernet termination is required.
Key Features
- 24-Port Cat6 Patch Panel: Provides 24 ports for centralized Ethernet cable termination and network patching.
- Cat6 UTP Support: Designed for Category 6 unshielded twisted-pair structured cabling applications.
- 110/Krone Dual IDC: Accepts either 110 or Krone punch-down tools for flexible cable termination.
- 22-26 AWG Cable Support: Compatible with both stranded and solid network wires within the specified gauge range.
- 45-Degree Jacks: Angled jack orientation helps reduce strain on connected patch cables.
- Dual Wiring Configuration: Supports T568A and T568B wiring schemes through the dual IDC arrangement.
- Durable Contact Construction: Uses phosphor bronze contacts with nickel and gold plating for the contact areas.
- Compact Rack Installation: Measures approximately 43 × 483 × 52 mm for organized network cabinet installation.
Technical Specifications
| Specification |
Details |
| Brand |
Micronet |
| Model |
SP1161S |
| Product Type |
Cat6 Patch Panel |
| Cable Type |
UTP |
| Category |
Cat6 |
| Port Capacity |
24 Ports |
| IDC Type |
110 / Krone Dual IDC |
| Tool Compatibility |
110 and Krone Punch-Down Tools |
| Wire Compatibility |
22-26 AWG Stranded and Solid Wire |
| Jack Contact Material |
Phosphor Bronze |
| Contact Plating |
50 Micro-Inch Nickel Plated |
| Contact Area |
Minimum 30 Micro-Inch Gold Plated |
| Terminal Block Material |
Phosphor Bronze |
| Terminal Plating |
50 Micro-Inch Tin-Lead Plated over 50-60 Micro-Inch Nickel Plated |
| Jack Bracket Material |
ABS + PC |
| Flammability Rating |
UL94V-0 |
| Jack Orientation |
45-Degree |
| Wiring Standard |
T568A / T568B |
| Dimensions |
43 × 483 × 52 mm (W × D × H) |
24-Port Cat6 Patch Panel
The SP1161S provides 24 network ports for organizing multiple Ethernet cable connections in one centralized location. This makes it suitable for structured cabling systems where permanent cable runs need to be terminated and connected to network switches through patch cords.
Centralizing cable termination helps simplify network administration, troubleshooting, cable identification, and future moves or changes within the network cabinet.
Cat6 UTP Compatibility
The SP1161S is specified as a Category 6 UTP patch panel. It is designed for use with compatible unshielded twisted-pair network cabling and can form part of a Cat6 structured cabling channel.
For the best network performance, the patch panel should be used with compatible Cat6 cable, modular connectors, patch cords, and other components that meet the requirements of the intended cabling system.
110 and Krone Dual IDC
One of the main features of the Micronet SP1161S is its 110/Krone dual IDC termination. This allows installers to use either a 110-style or Krone-compatible punch-down tool when terminating the network cable.
This dual-termination design provides additional flexibility for professional installers who may use different punch-down tools during structured cabling projects.
22-26 AWG Cable Support
The patch panel supports 22-26 AWG stranded and solid wire. This makes it suitable for a range of structured network cabling configurations within the specified conductor gauge range.
Installers should ensure that the cable construction and conductor size are compatible with the patch panel and the rest of the structured cabling system.
T568A and T568B Wiring
The SP1161S uses a dual IDC design that supports both T568A and T568B wiring schemes. The appropriate color coding is marked on the termination block to help installers position the individual conductors correctly.
Whichever wiring scheme is selected, it should be applied consistently throughout the relevant network connection to ensure proper Ethernet connectivity.
45-Degree Jack Design
The SP1161S features 45-degree network jacks. The angled design helps reduce mechanical strain on patch cables connected to the front of the panel and can contribute to a cleaner cable-routing arrangement inside a network cabinet.
This design is particularly useful in installations where multiple patch cables are connected closely together.
Contact Construction
The patch panel uses phosphor bronze contact material with nickel plating and gold-plated contact areas. The published specification identifies a minimum 30 micro-inch gold-plated contact area and 50 micro-inch nickel plating.
The IDC terminal block uses phosphor bronze with a tin-lead plating layer over nickel plating, providing the specified contact construction for the cable termination interface.
Durable Housing Material
The jack bracket set is manufactured from ABS + PC material and carries a UL94V-0 flammability rating. This provides a durable enclosure structure for the modular jack assembly used in the patch panel.
Structured Cabling Applications
The Micronet SP1161S can be used as a centralized termination point in a variety of structured Ethernet cabling installations.
- Cat6 structured cabling
- Enterprise LAN networks
- Office network installations
- Server rooms
- Network cabinets
- Telecommunications rooms
- Data centers
- Commercial buildings
- Campus networks
- ISP and network infrastructure
Network Patching and Cable Management
A patch panel separates permanent horizontal cabling from patch connections to active equipment. Network cables can be terminated at the SP1161S while short patch cables connect the front ports to Ethernet switches.
This arrangement makes it easier to reorganize network connections without disturbing permanent cable runs. For larger installations, additional horizontal or vertical cable-management accessories can be used to maintain clean cable routing.
Rack and Cabinet Installation
The SP1161S measures approximately 43 × 483 × 52 mm. Its 483mm width is suited to standard network-rack installation, while its compact height helps maintain an organized rack layout.
The patch panel can be installed alongside Ethernet switches, cable-management panels, fiber-optic equipment, power distribution units, and other network infrastructure components.
Installation Procedure
During installation, the outer jacket of the network cable should be prepared according to the manufacturer's recommended termination procedure. The individual conductors should then be arranged according to the selected T568A or T568B wiring scheme.
The conductors are seated into the appropriate IDC terminals using a compatible 110 or Krone punch-down tool. The cable holder can be used to maintain organized cable positioning before completing the termination.
After termination, the completed network connection should be tested using an appropriate cable tester to verify continuity and correct wiring.
Compatibility Notice
The SP1161S is a UTP Cat6 patch panel. It should not be confused with the Micronet SP1164S, which is the corresponding FTP Cat6 version listed in Micronet's product documentation.
The exact network performance of a structured cabling channel depends on all connected components, including the cable, patch panel, jacks, patch cords, and active network equipment.
Why Choose the Micronet SP1161S?
The Micronet SP1161S combines 24-port Cat6 UTP connectivity with 110/Krone dual IDC termination, T568A/T568B wiring support, 22-26 AWG cable compatibility, and 45-degree jacks.
Its compact construction and flexible punch-down design make it a practical choice for structured cabling installers, network technicians, offices, server rooms, and enterprise network cabinets.
Buy Micronet SP1161S 24-Port Patch Panel in Bangladesh
The Micronet SP1161S Cat6 24-Port Patch Panel is suitable for network installers, IT professionals, structured cabling contractors, system integrators, businesses, and enterprise infrastructure projects in Bangladesh.
Before purchasing, verify that you require the UTP Cat6 SP1161S version and not the FTP Cat6 SP1164S model. Also confirm the required cable gauge and termination-tool compatibility for your installation.
Why Buy from Independent Tech BD?
- Networking & IT Products
- Competitive Price in Bangladesh
- Enterprise IT Solutions
- Corporate & Project Supply
- Technical Assistance
- Product Compatibility Support
- Nationwide Delivery
- Reliable After-Sales Service
Independent Tech BD supplies Micronet networking products, patch panels, RJ45 connectors, structured cabling components, network tools, server hardware, and IT infrastructure products for home, business, corporate, ISP, and enterprise requirements.
Frequently Asked Questions
What is the Micronet SP1161S?
The Micronet SP1161S is a 24-port Cat6 UTP patch panel designed for structured Ethernet cabling installations.
How many ports does the SP1161S have?
The SP1161S provides 24 network ports.
What category is the Micronet SP1161S?
The SP1161S is a Cat6 patch panel designed for UTP structured cabling.
Does the SP1161S support 110 and Krone punch-down tools?
Yes. It features 110/Krone dual IDC and accepts either 110 or Krone-compatible punch-down tools.
What cable gauge does the SP1161S support?
It supports 22-26 AWG stranded and solid wire.
Does the SP1161S support T568A and T568B?
Yes. The dual IDC design supports both T568A and T568B wiring configurations.
What is the purpose of the 45-degree jacks?
The 45-degree jack orientation helps reduce strain on patch cables and can make cable routing within the rack more manageable.
What are the dimensions of the SP1161S?
The published dimensions are approximately 43 × 483 × 52 mm (W × D × H).
What material is used for the jack bracket?
The jack bracket set uses ABS + PC material with a UL94V-0 flammability rating.
Is the SP1161S shielded?
No. The SP1161S is specified as the UTP Cat6 version. Micronet's SP1164S is the corresponding FTP Cat6 model.
Can the SP1161S be used with Cat6 Ethernet cable?
Yes. It is specifically designed as a Cat6 UTP patch panel and can be used with compatible Cat6 structured cabling.
Where can the Micronet SP1161S be used?
It is suitable for offices, server rooms, network cabinets, data centers, telecommunications rooms, commercial buildings, and enterprise structured cabling installations.
Does the patch panel improve Internet speed?
A patch panel does not independently increase Internet speed. Network performance depends on the complete cabling channel, including the cable, connectors, patch cords, switches, and other network equipment.
Where can I buy the Micronet SP1161S in Bangladesh?
The Micronet SP1161S 24-Port Cat6 Patch Panel is available from networking equipment suppliers in Bangladesh, including Independent Tech BD.
