IP-COM Pro-6-LR AX3000 Wi-Fi 6 Dual-Band Long-Range Access Point
The IP-COM Pro-6-LR is an AX3000 dual-band Wi-Fi 6 long-range access point designed for business, enterprise, hotel, and high-density indoor wireless networks. It supports IEEE 802.11a/b/g/n/ac/ax and delivers up to 3000Mbps combined wireless speed, with up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
The Pro-6-LR combines 2×2 MU-MIMO, OFDMA, beamforming, 160MHz channel width, high-power RF design, Gigabit Ethernet connectivity, and IEEE 802.3at PoE. It supports up to 254 concurrent clients and can be centrally managed through compatible IP-COM ProFi infrastructure, including ProFi Cloud and ProFi Software Controller. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
AX3000 Wi-Fi 6 Dual-Band Performance
The Pro-6-LR operates simultaneously on the 2.4GHz and 5GHz bands. Its 2.4GHz radio supports up to 574Mbps, while the 5GHz radio supports up to 2402Mbps. Together, these provide a maximum combined wireless rate of approximately 3000Mbps. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
160MHz Channel Width
The 5GHz radio supports channel widths of up to 160MHz. When used with compatible client devices and suitable RF conditions, wider channels can provide greater wireless throughput for high-bandwidth applications. The available channel width is also dependent on local regulatory requirements and radio-frequency conditions.
Wi-Fi 6 Technologies
The Pro-6-LR incorporates Wi-Fi 6 technologies including OFDMA, 2×2 MU-MIMO, beamforming, and Target Wake Time (TWT). These technologies are designed to improve spectrum efficiency, simultaneous client communication, wireless coverage, and overall network performance in multi-device environments. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Long-Range High-Power Wireless Design
IP-COM positions the Pro-6-LR as a long-range access point with enhanced RF design. The device uses four integrated 4dBi antennas and specifies maximum output power of approximately 29 ± 1.5dBm on both 2.4GHz and 5GHz. Actual wireless range depends on building construction, interference, mounting position, client capabilities, channel conditions, and regulatory limitations. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Dual Gigabit Ethernet Connectivity
The Pro-6-LR provides two 10/100/1000Mbps Ethernet ports, with one port designated for PoE input. This gives the access point a Gigabit wired uplink while providing an additional Ethernet interface for suitable network deployments. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
IEEE 802.3at PoE
The access point supports IEEE 802.3at PoE for power delivery through compatible network infrastructure. The manufacturer's datasheet specifies maximum power consumption of 15.74W. Some Pro-6-LR V2.0 market documentation also identifies an included PoE injector, so package contents should be checked against the exact regional SKU supplied. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Centralized ProFi Management
The Pro-6-LR is part of IP-COM's ProFi ecosystem. Compatible deployments can use ProFi Cloud, ProFi Software Controller, and compatible M-series or AC-series management infrastructure. This allows administrators to manage and monitor supported access points from a centralized platform. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
Technical Specifications
| Brand | IP-COM |
| Model | Pro-6-LR |
| Product Type | AX3000 Wi-Fi 6 Dual-Band Long-Range Access Point |
| Wireless Standard | IEEE 802.11a/b/g/n/ac/ax |
| Frequency Bands | 2.4GHz and 5GHz |
| 2.4GHz Data Rate | 1–574Mbps |
| 5GHz Data Rate | 6–2402Mbps |
| Combined Wireless Rate | Up to 3000Mbps |
| Channel Width | 20/40/80/160MHz |
| MU-MIMO | 2×2 MU-MIMO |
| Ethernet Ports | 2 × 10/100/1000Mbps |
| PoE Input | IEEE 802.3at |
| Maximum Power Consumption | 15.74W |
| Antennas | 4 × Internal 4dBi |
| Maximum Concurrent Clients | 254 |
| Operating Mode | AP |
| SSID Capacity | 7 on 2.4GHz / 4 on 5GHz |
| LED Indicator | RGB |
| Button | 1 × Reset |
| Dimensions | Φ250.6 × 55mm |
| Mounting | Ceiling / Wall |
| Operating Temperature | -10°C to 45°C |
| Operating Humidity | 10%–90% RH, non-condensing |
The core specifications above are based on IP-COM's official Pro-6-LR datasheet. IP-COM also provides separate V2.0 documentation and firmware, so exact specifications and included accessories should be checked against the hardware revision supplied. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
Wireless Security and Management
- WPA3 security support on current product documentation
- Multiple SSID support
- SSID hiding
- OFDMA
- 2×2 MU-MIMO
- Beamforming
- Target Wake Time (TWT)
- Centralized ProFi Cloud management
- ProFi Software Controller support
- Local web management
Applications
- Enterprise office Wi-Fi networks
- Hotels and hospitality environments
- Small and medium business networks
- High-density indoor wireless deployments
- Commercial buildings
- Educational and institutional networks
- ProFi-managed multi-AP wireless networks
- Long-range indoor Wi-Fi coverage
Installation Considerations
The Pro-6-LR is designed for ceiling or wall mounting and has a circular 250.6 × 55mm form factor. For PoE installation, use a compatible IEEE 802.3at PoE switch or injector. The PoE connection should be made to the designated PoE-capable Gigabit Ethernet port. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
For maximum Wi-Fi performance, use suitable Cat5e or better Ethernet cabling, provide a Gigabit network uplink, and install the AP where physical obstructions and RF interference are minimized. To take advantage of 160MHz operation and the full 2402Mbps 5GHz rate, compatible Wi-Fi 6 client devices and appropriate channel conditions are required.
Current Hardware Revision
IP-COM currently provides both original Pro-6-LR documentation and Pro-6-LR V2.0 firmware and documentation. The manufacturer's search page lists V2.0 firmware released in 2026, indicating that buyers should verify the hardware revision when purchasing replacement units or planning a managed deployment. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
Why Choose IP-COM Pro-6-LR?
The Pro-6-LR combines AX3000 Wi-Fi 6 performance, 160MHz channel support, 2×2 MU-MIMO, OFDMA, beamforming, dual Gigabit Ethernet, 802.3at PoE, and long-range RF design. It is designed for professional wireless environments that need higher capacity and throughput than typical Wi-Fi 5 access points. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
Frequently Asked Questions
What is the IP-COM Pro-6-LR?
The Pro-6-LR is an AX3000 dual-band Wi-Fi 6 long-range access point designed for business, hotel, enterprise, and high-density indoor wireless networks. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
What is the maximum Wi-Fi speed of the Pro-6-LR?
The access point supports up to 574Mbps on 2.4GHz and 2402Mbps on 5GHz, providing a combined wireless rate of up to 3000Mbps. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Does the Pro-6-LR support Wi-Fi 6?
Yes. It supports IEEE 802.11ax alongside earlier 802.11a/b/g/n/ac standards. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Does the Pro-6-LR support 160MHz?
Yes. The manufacturer's specifications list 20MHz, 40MHz, 80MHz, and 160MHz channel widths. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Does the Pro-6-LR support PoE?
Yes. It supports IEEE 802.3at PoE. The access point has two Gigabit Ethernet interfaces, with one serving as the PoE input. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
How many Ethernet ports does it have?
The Pro-6-LR provides two 10/100/1000Mbps Ethernet ports, including one PoE-capable port. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
How many clients can the Pro-6-LR support?
IP-COM specifies a maximum of 254 concurrent clients. Actual usable capacity depends on traffic requirements, RF conditions, client behavior, and deployment design. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Does it support MU-MIMO and OFDMA?
Yes. The Pro-6-LR supports 2×2 MU-MIMO and OFDMA, both important Wi-Fi 6 technologies for improving multi-client wireless efficiency. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Can the Pro-6-LR be centrally managed?
Yes. IP-COM documentation identifies ProFi Cloud, ProFi Software Controller, and compatible M-series and AC-series management options for the Pro-6-LR V2.0. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
What is the size of the Pro-6-LR?
The official specification lists dimensions of approximately Φ250.6 × 55mm. ([ip-com.com.cn](https://down.ip-com.com.cn/en/Pro%206%20LR/Pro-6-LR_Datasheet.pdf?utm_source=chatgpt.com))
Is the Pro-6-LR suitable for hotels and offices?
Yes. IP-COM positions the Pro-6-LR for business and hotel deployments, while its Wi-Fi 6 features, 254-client maximum, centralized management options, and long-range RF design make it suitable for professional indoor WLAN projects. ([ip-com.com.cn](https://www.ip-com.com.cn/en/search/pro-6-lr.html?utm_source=chatgpt.com))
